PPR Pipe Production Line
PE series plastic pipe material productionline Is mainly used In the area of agicultural water supply sysemarchitetctural water supply system, pavement ofcables,etc.This machine group consists mainly ofvacuum callbrating tank,naul-oft unit,cutting unit,tilter,etc. Single screw extruder and haul-off unit have appliedimboded A/c inverter,both vacuum pump and driving motor have applied excellent products.The haul-off unit includes two-claw type,three-claw type four-clawtvoe six- claw type ,eight-claw type,ten-claw type,twelve-claw type,etc. No-scraps cutting,saw cutting or planet cutting can be applied,the property of machine groupis reliale the production eflicy is high.With specialdevice,it can produce inner wall spiral p,niner wall hollo pipe ,and core layer foam pip,etc,it can alsoluce PP PE. ABS,PPR,PEX,silicon core pipe and pipe material of other material.The planetary cutting machine is fully automatic computer digital control,it hassuch advantages of simpleoperation,reliable property,etc. It has reached world advanced level.
Main Technical Parameter
| Model | SJ-65 | SJ-90 | SJ-120 |
|---|---|---|---|
| Main Motor Power(kw) | 30-37 | 55-75 | 90 |
| Cylinder Heating Power(kw) | 23 | 34 | 48 |
| L:D | 30:1 | 30:1 | 30:1 |
| Production Capacity(kg/h) | 80-100 | 120-150 | 200-220 |
| Vacuum Pump Power(kw) | 5.5 | 7.5 | 7.5 |
| Water Pump Power(kw) | 4 | 4 | 4 |
| Mobile Motor Power(kw) | 0.75 | 0.75 | 1.1 |
| Drawing Power(kw) | 3 | 4 | 5.5 |
| Cutting Motor Power(kw) | 2.2 | 2.2 | 3 |
| Power(kw) | 72 | 110 | 160 |
| Equipment Arrangement Length(m) | 30 | 36 | 42 |
Units of PPR Pipe Production Line
Single Screw Extruder
A single screw extruder is a common plastic processing machine. It uses a rotating screw inside a heated barrel to melt and push material through a die to create continuous shapes.
Key features: simple, reliable, and cost effective.
Typical uses: pipes, profiles, sheets, films, and compounding.
While twin screw extruders mix better, single screw extruders are the goto choice for general extrusion because of their simplicity and efficiency.
Vacuum calibration tank
Length: 6000mm
Vacuum Pump
Water Pump
Cooling type: by spraying nozzle
—Adjustment method of vacuum calibration tank
Front-back movement:600mm by motor
Up-down movement: ±50mm by hand wheel
Left-right movement: ±50mm by hand wheel
Tank material: stainless steel
Tank Lengthways Move:Adopt Gearbox Speed Reducer Motor,
Adjusting Distance equal to 800mm
Spray Cooling Tank
Length: 6000mm
Water Pump
Cooling type: by spraying nozzle
—Adjustment method of vacuum calibration tank
Up-down movement: ±50mm by hand wheel
Left-right movement: ±50mm by hand wheel
Tank material: stainless steel
Haul-off Machine
Effective length:≥1800mm
Haul-off speed: 0-5m/min
Speed range: 0.5-6m/min
Clamp control: by pneumatic cylinder
Safety cover: with glass window
Rubber block
Cutter
Cutting motor
Revolving motor
Knife enter motor
Dust-collecting fan
Cutting knife
Cutting mode: automatic cutting
Safety cover: with glass window
Cutting diameter: customized
Stacker
Length: 6,000mm
Length adjustment: limit switch
Discharging: Pneumatic control by cylinder
Final Product





Features and Application
The production line is mainly used in pipe production line which adopts PP-R resin as its raw material.besides.it is suitable for pipe production adopting PP, PPB, PPC. PE, ABS resin as raw materials.
- PLC control, high degree of automation
- Adopting special and good effect screw
- Adopting compound spiral engine head,effectively deleting memory function of the material
- Vacuum calibration,constant temperature control,eliminating pipe stress
- Adopting coextrusion head to improve the tube with color line
- High extrusion capacity,low temperature of melt,equal temperature of melt



