PVC Glazed Tile Production line
Production line is mainly used for the production of PVC+ASA/PVC multi layers composite resin tile, glazed tile, specification have width 880mm and 1050mm or customized, thickness 1-3mm, pitch 220mm ,250mm.PVC layer consists of SJZ80/156 conical twin screw extrusion machine production, ASA layer extruded by the SJ50 single screw extrusion machine, equipment and T type mold, molding machine, cutting machine and stack frame. Supply formula guide service and staple raw material purchase Professional analyzing and design by considering production cost and tile's performance.
Units of PVC Glazed Tile Production line
Extruded Part
A conical twin-screw extruder is a high‑efficiency machine designed primarily for PVC and other heat‑sensitive materials. Its two screws taper from a wider feeding section to a narrower discharge end, which allows for:Better feeding of powders or pellets Gentle, uniform melting with low shear stress Reduced risk of material degradation This design delivers stable output, excellent mixing, and energy efficiency. It is the industry standard for producing PVC pipes, profiles, window frames, WPC, and compounds.
Clothes rack type Mould
Mold width: 1300mm
Head surface: 0.04-0.05mm
Effective width:1050mm
Heating zones: 7 zones
Powder: 3.5kw*7zones
Distributor
The distributor is designed as a block The overall flow channel is designed with 3d melt flow simulation software, produced in
processing center ,reached micron level, ensuring the one-time manufacturing of the mold and greatly reducing the number of mold
repairs.
Embossing Machine
Roller diameter: 240mmRoller length:1360mm
Motor power: 0.75kw*2sets
Roller material： #45 steel, surface hard chromium plating process
Forming Machine
Quantity of module: 44pcs(22 pairs) normally, can customized
Material: aluminum alloy
Extrusion line speed：0-3m/min
Max haul-off power: 50KW
Driver motor power: 5.5kw
Cooling mode:fan cooling, 0.55kw*8sets
Transverse cutter
Cutting motor:2.2kw
Center height:1000±50mm
Max cutting dimension：1200*100mm
Final Product
Two-layers(3 or 4 also can produce) PVC resin Roof Tile Width: 880mm/ 1050mm
Thickness: 1.5-3mm normally
Raw material: PVC powder, CaCo3, ASA
Using life: 30 years (according to formula)
Features and Application
- Production line is mainly used for the production of PVC+ASA/PVC multilayer composite resin tile, glazed tile, specification have width 880mm, 1050mm;thickness 2.5-3mm;pitch 220mm and 250mm.
- PVC layer consists of SJSZ80/156 conical twin screw extrusion machine production, ASA layer extruded by the SJ50 single screw co-extrusion machine.
- Supply formula guide service and staple raw material purchase.
- Professional analyzing and design by considering production cost and tile’s performance.
