PVC Pipe Production Line
Max. pipe diameter of the large-aperture PVC pipe material production line can reach 800mm.Extruder machine: 65/132 twin screw extruder, 80/156 twin screw extruder, 92/188 twin screw extruder The auxiliary machines: GF250, GF500 and GF800 three series. The haul-off machine: 2/3/4/6 claw haul-off machine for your to choose The cutting machine: ring-cutting machine and planetary cutting machine for you to choose.
Main Technical Parameter
| Model | GF110 | GF200 | GF400 | GF630 | GF800 |
|---|---|---|---|---|---|
| Max.pipe diameter(mm) | 110 | 200 | 400 | 630 | 800 |
| Total power of auxiliary machines(kw) | 12.0 | 14.0 | 18.0 | 27.0 | 35.0 |
| Volume of cooling water(m³) | 3 | 6 | 6 | 9 | 12 |
| Pressure of compressed air(Mpa) | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |
Units of PVC Pipe Production Line
Conical Twin screw extruder
A conical twin-screw extruder is a high‑efficiency machine designed primarily for PVC and other heat‑sensitive materials. Its two screws taper from a wider feeding section to a narrower discharge end, which allows for:
Better feeding of powders or pellets
Gentle, uniform melting with low shear stress
Reduced risk of material degradation
This design delivers stable output, excellent mixing, and energy efficiency. It is the industry standard for producing PVC pipes, profiles, window frames, WPC, and compounds
Mold
Layer structure: Single layer
Extrusion die head material: 40Cr.
Inside and outside surface plating chrome
Heater band material: ceramic
Vacuum calibrator material: brass
Structure type:: Electromotion trolley
Vacuum Calibration Tank
Length: 6000mm
Vacuum Pump
Water Pump
Cooling type: by spraying nozzle
—Adjustment method of vacuum calibration tank
Front-back movement:600mm by motor (0.75kw)
Up-down movement: ±50mm by hand wheel
Left-right movement: ±50mm by hand wheel
Tank material: stainless steel
Height of machine: 1000±50mm
Haul-off machine
Type: rubber pad
Clamping method: upper caterpillar pneumatic clamping
Down caterpillar manual lifting
Upper caterpillar limit device
Caterpillar effective length: 1400mm
Speed range: 1-6m/min
Safety cover: with glass window
Pneumatic clamping: adopt anti-friction rubber block
Cutting
Pipe range:customized
Cutting System
Blade entering method: Hydraulic control
Cutting control: Automatic/manual
Cutting mode: automatic cutting
Safety cover: with glass window
Clamp: by pneumatic
Stacker
Length: 6,000mm
Length adjustment: limit switch
Discharging: Pneumatic control by cylinder
Final Product
Features and Application
- The extruder can be selected from 80 double screw extruder machine, 92 double screw extrder machine and parallel double screw extruder.
- The auxiliary machine: GF400,GF630 and GF800 three series.
- The haul-off machine: 3 claws, 4 claws and 6 claws;
- The cutting machine: ring-cutting machine and planetary cutting machine.
