PVC Wave Tile Production line
Production line is mainly used for the production of PVC+ASA/PVC multi layers composite resin tile, glazed tile, specification have width 880mm and 1050mm or customized, thickness 1-3mm, pitch 220mm ,250mm.PVC layer consists of SJZ80/156 conical twin screw extrusion machine production, ASA layer extruded by the SJ50 single screw extrusion machine, equipment and T type mold, molding machine, cutting machine and stack frame. Supply formula guide service and staple raw material purchase Professional analyzing and design by considering production cost and tile's performance.
Main Technical Parameter
| Model | Width（mm） | Thickness（mm） | Product type | Power（kw） | Max. capacity(kg/h) |
|---|---|---|---|---|---|
| SJSZ80/156 | 840-1130 | 2-3 | Wave/T-type | 55 | 350 |
| SJSZ92/188 | 1130-1450 | 2-3 | Wave/T-type | 110 | 700 |
Units of PVC Wave Tile Production line
Extruded Part
A conical twin-screw extruder is a high‑efficiency machine designed primarily for PVC and other heat‑sensitive materials. Its two screws taper from a wider feeding section to a narrower discharge end, which allows for:Better feeding of powders or pellets Gentle, uniform melting with low shear stress Reduced risk of material degradation This design delivers stable output, excellent mixing, and energy efficiency. It is the industry standard for producing PVC pipes, profiles, window frames, WPC, and compounds.
Clothes rack type Mould
Mold width: 1300mm
Head surface: 0.04-0.05mm
Effective width:1050mm
Heating zones: 7 zones
Powder: 3.5kw*7zones
Distributor
The distributor is designed as a block The overall flow channel is designed with 3d melt flow simulation software, produced in
processing center ,reached micron level, ensuring the one-time manufacturing of the mold and greatly reducing the number of mold
repairs.
Forming Part
Length:1000mm
Width:1250mm
Quantities of Cylinder:4sets
Cooling Water:5-6Ton/hour
Haul-off Part
Clam width: 1150mm
Rubber roller diameter: φ180mm×2
Drawing speed: 0.25-4m/min
Motor power: 1.5kw
Cylinder quantity: φ125×100 2pcs
Cutter
saw cutting
Cutting motor power: 2.2KW
Lateral saw-input :0.37kw
Dust motor:3kw
Control: Pneumatic control
Blade Diameter: φ360mm
Max cutting dimension: 1200*100mm
Center height: 1000±50mm
Equipped with special adjustable locator in order to ensure the accuracy of the location of each cut.
Final Product
Two-layers(3 or 4 also can produce) PVC resin Roof Tile Width: 880mm/ 1050mm
Thickness: 1.5-3mm normally
Raw material: PVC powder, CaCo3, ASA
Using life: 30 years (according to formula)
Features and Application
- Optional to adopt conical twin screw extruder and single screw extruder
- Supply formula guide and staple raw material purchase
- Professional analyzing and design by considering production cost and tile’s performance
- Single layer or A+B/A+B+C/A+B+A layer available
